Aluminium

Form liquid
Colour white
Application area
Most Aluminium/Magnesium alloys

Capabilities / Properties

• High temperature stability
• No residues / build up
• Good mixability
• Excellent release and slide effect
• Good varnishability
• Bright and shiny castings

Form liquid
Colour white
Application area
Most Aluminium/Magnesium alloys

Capabilities / Properties

• Wax reduced release agent 
• Very good release and slide effects in a temperature range approx. up to 300⁰ C before spraying 
• Less residues on the die and on/in the spray equipment 

Form liquid
Colour white
Application area
Most Aluminium/Magnesium alloys

Capabilities / Properties

• Wax reduced release agent 
• Very good release and slide effects in a temperature range approx. up to 380⁰ C before spraying 
• Less residues on the die and on/in the spray equipment 

Form liquid
Colour white
Application area
Most Aluminium/Magnesium alloys

Capabilities / Properties

• Good temperature stability
• Less residues / build up
• Good mixability
• Good release and slide effect
• Good varnishability

Form liquid
Colour white
Application area
Most Aluminium/Magnesium alloys

Capabilities / Properties

• Good temperature stability
• Less residues / build up
• Good mixability
• Good release and slide effect
• Good varnishability

Form liquid
Colour white
Application area
Most Aluminium/Magnesium alloys

Capabilities / Properties

• High temperature stability
• Less residues / build-up
• Good mixability
• Excellent release and slide effect also on older dies
• Varnishability

Form liquid
Colour white
Application area
Most Aluminium/Magnesium alloys

Capabilities / Properties

• Good temperature stability
• Less residues / build up
• Good mixability
• Excellent release and slide effect
• Varnishability

Form liquid
Colour white
Application area
Most Aluminium/Magnesium and Zinc alloys

Capabilities / Properties

• Sufficient temperature stability
• Less residues / build-up
• Good mixability
• Sufficient release and slide effect
• Good varnishability
• Dilution ratios 1:30 - 1:60

Form liquid
Colour white
Application area
Most Aluminium/Magnesium and Zinc alloys

Capabilities / Properties

• Sufficient temperature stability
• Less residues / build-up
• Good mixability
• Sufficient release and slide effect
• Good varnishability
• Dilution ratios 1:30 - 1:60

Form liquid
Colour white
Application area
Aluminium alloys

Capabilities / Properties

• Bright casting surface
• Virtually no build-up in the die cavity or overspray areas of die
• Superb lubricating properties for all movable parts of the die
• Highly resistant to bacteria and fungus when handled correctly
• Excellent wetting properties, especially in deep cavities in the die
• Good corrosion protection to all parts of the die and the machine itself
• Excellent release and sliding properties, especially at very high die temperatures
• Easy to clean from casting
• Easily broken down in conventional waste water treatment plants; high degree of environmental compatibility
• Shear stable. Emulsion will not split from the shear generated in a central system

Magnesium

Form liquid
Colour white
Application area
Magnesium 

Capabilities / Properties

• Sufficient temperature stability
• Less residues / build up if used in dilution ratios of approx. 1:35 - 1:65
• Good mixability
• Good release and slide effect
• Good varnishability

Form liquid
Colour white
Application area
Magnesium 

Capabilities / Properties

• Sufficient temperature stability
• Less residues / build up if used in dilution ratios of approx. 1:35 - 1:65
• Good mixability
• Good release and slide effect
• Good varnishability

Zinc

Form liquid
Colour white
Application area
Zinc / Zamak

Capabilities / Properties

• Sufficient temperature stability
• Less residues / build-up
• Good mixability
• Sufficient release and slide effect
• Good varnishability
• Dilution ratios 1:10 - 1:20

Form liquid
Colour white
Application area
Most Aluminium/Magnesium and Zinc alloys

Capabilities / Properties

• Sufficient temperature stability
• Less residues / build-up
• Good mixability
• Sufficient release and slide effect
• Good varnishability
• Dilution ratios 1:20 - 1:50

Aluminium paste form

Form paste
Colour black
Application area
Specially formulated paste that is designed to be used for the initial treatment of new or reconditioned dies. 

Application of Trennex AL should be repeated tor the first 10 to 15 shots or until a uniform black coating is obtained on all parts of the die.

Form paste
Colour silver
Application area
Aluminium pigmented die lubricant that is designed to be used in standard production. It must be applied manually.

Form paste
Colour yellow
Application area
Pigment free paste release agent used in current production. It is applied manually to the die surface.

Aluminium liquid

Form liquid
Colour yellow
Application area
A non-water mixable pigment-free release agent for aluminium die-casting.

In most cases, Trennex VP 64/4 flüssig is used in connection with watermiscible
die-release agents.
Trennex VP 64/4 flüssig is to be used in undiluted condition. The quantity applied should be kept as small as possible. 

Form liquid
Colour yellow/brown
Application area
Water free release agent.  Application quantities should be small. Good wetting properties will permit it to migrate to deep recesses and undercuts.The lack of water improve/increase die life. 

Form liquid
Colour yellow/brown
Application area
Water free release agent.  Application quantities should be small. Good wetting properties will permit it to migrate to deep recesses and undercuts.The lack of water improve/increase die life. Shut up oil.

Magnesium

Form liquid
Colour yellow/brown
Application area
Trennex 3009 is specifically designed for magnesium

Excellent wetting properties

The lack of water in the product will assist the die to maintain proper operating tempertures and significantly improve/increase the die life.

Zinc

Form liquid
Colour blue
Application area
Trennex DECO ZN flüssig is a non-water mixable release agent especially developed for Zn pressure die-casting.

It can either be used in its original condition or in combination with Trennex Special Dilution at a mixing ratio of 1:1 to 1:5 or higher.

Trennex DECO ZN flüssig finds use in such cases where shining and perfect metal surface of castings is imperative and where subsequent surface treatment will take place. Negative influence with regards to electroplating, lacquering, etc., has not been experienced.